EASYPRESS HT2
High deposition thickness, chemical composition and high hardness make EasyPress HT2 the most performing solution in die casting. The hardness copes with the presence of silicon in the die-cast alloys, the chemical inertia of the Titanium and Aluminum Nitride contains the phenomena of metallization and the high thickness (12 microns) delays the formation of cracks due to thermal fatigue.
Main characteristics
High hardness, chemical inertness, high thickness
Main benefits
EasyPress HT2 high thickness reduces the phenomena of thermal fatigue and abrasive wear, increasing the productivity of the moulds. This PVD coating is recommended for hot-forming and drop forging of Fe-C based materials and light alloys.
Technical data
Composition
Multilayer based on Titanium and Aluminum
Deposition technology
HDP (High Density Plasma)
Thickness
10-12 μm
Hardness
3300 HV
Friction coeff. against 100Cr6
0,6
Deposition temp.
480°C
Max usage temp.
800°C
Color
Violet-blue
All data are intended as guide values. The exact values depend on the respective substrate, geometry and surface finish.
Case study
Component
Die casting mold
Material
1.2344
Antagonist
EN AB 46100
Problem to be solved
Wear due to abrasion, metallization and thermal fatigue
Standard solution
None
STS solution
Distension + EasyPress HT2
Risultato
80% increase in the number of molded pieces with reduction of the metallization phenomenon and thermal fatigue cracks.
